Z purlin forming machine - 80-300

Size of Section
h=80-300mm b=40-80mm
c=10-20mm t=2.0-3.0mm

1: Technical Parameters:
Power supply: 380V, 3 phases, 50 Hz (can be adjusted as user need.)
Feeding thickness: 2-3mm
Main power: 25KW
Pump power: 7.5kw
Forming speed: 24m/min
Roll station: 12 groups
Hydraulic pressure: 10-12Mpa
Cutter material: Cr12
Roller material: bearing steel
Material of shaft: 45# steel with heat treatment
Diameter of shaft: 95 mm
Control system: Full-automatic NC-PLC system

2: Working Process Flow:
Manual Decoiler-Roll Forming Machin-PLC System-Hydraulic System-Punching- Cutting-Formed Plate Collection Stack

We design and produce all kinds of corrugated metal sheet roll forming machine, including metal tile forming machine, colored glazed steel tile forming machine, highway barrier and metal billboard forming machine, shutter slat and goods shelf panel forming machine.

Roll forming machines fabricate specific configurations out of long strips of metal, most commonly coiled steel. In most applications, the required cross-section profile of the piece is specifically designed for the machine to bend the metal as necessary. Other than roll forming, these machines perform a number of metalworking duties, including material cutting and roll punching.
Roll forming machines, for the most part, work in a continuous cycle. The material is fed into the machine where it continuously makes its way through the stages of each operation, ending with the completion of a final product.

Sales Manager: Bessie Zhao