Welding & Solders

The welder assembles the most three part of welding transformer, welding tongs and water cable as one, and the volume is reduced by 75%, weight is reduced by 80% and 72.3% power savings.· The welder has bearings turntable hanging device, can be mobile we

50/60HZ,220/380V,welding work voltage 26v,electric start or manual, rate power withour welding 4.6kw,single cylinder,4stroke,air cooled,direct injection,105sets fit one 20 feets container,418cc displacementGIANT is able to be your original equipment manuf

Operating range: 1000mm to1200mmWelding size: 800mm,900mm,1000mm,1200mmUse for PE、HDPE、PP and other Plastic pipe materialHydraulic power unit power: 3.0KW Milling cutter power: 3.0KWHeating-Plate power:30.00KW

Operating range: 800mm to 1000mmWelding size: 800mm,900mm,1000mmUse for PE、HDPE、PP and other Plastic pipe materialHydraulic power unit power: 3.0KW Milling cutter power: 3.0KWHeating-Plate power:13.0KW

Operating range: 630mm to 800mmWelding size: 630mm,710mm,800mmUse for PE、HDPE、PP and other Plastic pipe materialHydraulic power unit power: 1.5KW Milling cutter power: 2.2KWHeating-Plate power:10.3KW

Operating range: 400mm to 630mmWelding size: 400mm,450mm,500mm,560mm,630mmUse for PE、HDPE、PP and other Plastic pipe materialHydraulic power unit power: 1.5KW Milling cutter power: 1.5KWHeating-Plate power:9.2KW

Operating range: 90mm to 250mmWelding size: 90mm,110mm,125mm,140mm,160mm,180mm,200mm,225mm,250mmUse for PE、HDPE、PP and other Plastic pipe materialHydraulic power unit power: 0.75KW Milling cutter power: 1.1KW Heating-Plate Power

Operating range: 63mm to 160mmWelding size: 63mm,75mm,90mm,110mm,125mm,140mm,160mmUse for PE、HDPE、PP and other Plastic pipe materialHydraulic power unit power: 0.75KW Milling cutter power: 0.71KW Heating-plate pow

CLH-II vertical Electrogas welder is used for auto welding vertical seam for large storage tank in normal construction.the equipment ride on the edge of wall of tank and run along the shell to each of verticlal seam , It adopts special-purpose flux-cor

specification ：GHH-II SAW girth welder is a high efficient auto welding equipment used in fabrication and welding of large petrolum storage tank, the machine hang on the shell of tank and travel along the edge of tank,with the back of flux tray, th