WASP V4 Belt 250 CNC RTF with CCPM/ 18A ESC/4500KV - HWH05-2

Feature:

Adopts CCPM control component , metal swashplate,tail rotor and Belt driven
system, professional gyro, which ensure the helicopter react fast on any kind of 3D
acrobatic flying courses and fllight stability.



7 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down &
Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE) New radio
control set



High Performace 4500KV Outrunner Brushless Motor used as the main drive and
makes the flight much stable and better performace



High quality CNC alloy rotor head dopts Light weight,Ultra tough Carbon Fiber
side board.



Using alloy tail boom.

Can fly in skyway, backward, and 3D aerobatic

CCPM mixing control system and collective pitch structure



120 degree CCPM system provides precise movement if comparing with the
traditional mechanical mixing since there are less linkage/push-rod in the helicopter
and weight is greatly reduced mproved blades give superior lift. Their pop off design
gives extra protection in case of heavy landing



Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide

good aerobatic responds



The autorotation landing system, made of high quality one-way bearing, maximally
protects your helicopter from damage



Hard, Light weight ABS Blades

Brand new design for the structure



Improved battery support that holds the battery firmly, and can also be adjusted to
suit your balance of flying



Tail rotor driven by belt provide stable flight and low noise

NO TAIL Motor - Tail Rotor driven by Belt with Servo Controlled Rudder like Gas-
Helicopter No need to worry about burning tail motors



Outer placed Head Lock Gyro

11.1V 900mAh high capacitance Li-Po battery provide enough power for any

aerobatic flight



With length-adjustable servo push-rod, precision sub trim can be easily set

Separate main shaft and main gear reduce repair time and noise

Weight is a key to a EP helicopter, lightened skid set, main gear, main frame and
canopy reduce the load of whole helicopter



Easy to fly and more stable lifting

Sky703 2.4G receiving and transmitting system increases the operation stability

With adjustable pitch system and 3D conversion

Provide excellent performance outdoor and indoor



Tail blade adopt flameout landing system

Newly Designed Rotor Head gives better control

Pre position servo mounts have been added in this helicopter, servos can be

mounted solidly by screw and easy to install



Extreme smooth control and stable flight

Precise controlling and hovering

Digital Proportional Motor Speed Control

Suitable for Indoor/Outdoor/Backyard/Stadium



Using the Ultra tough Carbon Fiber and Aluminum Alloy materials, the Helicopter
does have very strong structure. In addition, the main rotor blades are using top
quality ABS Blades , which is extremely light and not easily break



Approximately 15 minutes flight time on each charge - Optional Li- poly battery
will help to achieve better performance and longer flight time.

Best choice for Beginner - Advanced hobbyist

All spare parts and accessories are available



Complete Kit, Ready to Fly (Everything is included and 100% assembled -- 8 AA
batteries for the transmitter not included)





Specification:

Main Rotor Diameter : 470mm

Length : 460mm

Flying Weight : 330g

Driven system : Skyartec 4500KV brushless motor

Gyro : Sky600 Head Lock

Serv : 3X Skyartec 9g + 1X Skyartec 5g

ESC: Skyartec 18A

Battery : Skyartec 11.1V 900mAh Lithium Li-Po