WASP V3 250 4ch FP RTF Brushless version belt dri - HWH03-6

This new SKYARTEC's WASP V3 FP SE is concepted to be a high performance, ease of control,
stable, durable, and lightweight helicopter. The WASP V3 adopts PPM control system with tail rotor and
Belt driven system, professional gypo, which ensure the helicopter react fast on any kind of 3D acrobatic
flying courses. Furthermore, the WASP V3 is equiped with the latest radio control set with high

performace 4500KV Brushless Motor , Brushless ESC, and Li-Po Batttery. The WASP V3 is the perfect
choice for both the beginners and experts due to its compact size, stability, and agility. Also, the WASP V3
is best for flying in both indoor and outdoor as the CNC rotor head allows quick response on control
inputs and copes easily with windy outdoor conditions.


This model is designed with German know-how. It can be flown easily near the ground, and is highly
damage-resistant. It has been designed to allow people to learn to fly before moving to the next very
expensive models. The WASP V3's light and handy design fits for the beginners due to small body and
good stability. Expert pilots will also enjoy this model however, because it can be operated in small
rooms, garages etc.





Product included:



Wasp V3 FP SE helicopter; 18A brushless speed controller; head locked gyro; three servos; 4500kv
brushless motor; Sky703 2.4GHz 7ch TX/RX, 11.1V 900mah LI-PO battery and balance charger; USB
and Flight simular





Feature:



• 7 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control
(RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE) New radio control set

• High Performace 4500KV Outrunner Brushless Motor used as the main drive and makes the flight
much stable and better performace

• Can fly in skyway, backward, and 3D aerobatic

• Improved blades give superior lift. Their pop off design gives extra protection in case of heavy
landing

• Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good
aerobatic responds

• The autorotation landing system, made of high quality one-way bearing, maximally protects your
helicopter from damage

• Hard, Light weight ABS Blades

• Brand new design for the structure

• Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance
of flying

• Tail rotor driven by belt provide stable flight and low noise

• NO TAIL Motor - Tail Rotor driven by Belt with Servo Controlled Rudder like Gas-Helicopter

• No need to worry about burning tail motors

• Outer placed Head Lock Gyro

• 11.1V 900mAh high capacitance Li-Po battery provide enough power for any aerobatic flight

• With length-adjustable servo push-rod, precision sub trim can be easily set

• Separate main shaft and main gear reduce repair time and noise

• Weight is a key to a EP helicopter, lightened skid set, main gear, main frame and canopy reduce the
load of whole helicopter

• Easy to fly and more stable lifting

• PPM receiving and transmitting system increases the operation stability

• PPM mode with adjustable pitch system and 3D conversion

• Provide excellent performance outdoor and indoor

• Tail blade adopt flameout landing system

• Newly Designed Rotor Head gives better control

• Pre position servo mounts have been added in this helicopter, servos can be mounted solidly by
screw and easy to install

• Extreme smooth control and stable flight

• Precise controlling and hovering

• Digital Proportional Motor Speed Control

• Suitable for Indoor/Outdoor/Backyard/Stadium

• Using the Ultra tough Aluminum Alloy materials, the Helicopter does have very strong structure. In
addition, the main rotor blades are using top quality ABS Blades , which is extremely light and not
easily break

• Approximately 15 minutes flight time on each charge - Optional Li- poly battery will help to achieve

better performance and longer flight time.

• Best choice for Beginner - Advanced hobbyist

• All spare parts and accessories are available

• Complete Kit, Ready to Fly (Everything is included and 100% assembled -- 8 AA batteries for the
transmitter not included)





Specification:



• Main Rotor Diameter: 440mm (17.3 inch)

• Tail Rotor Diameter: 130mm (5.1 inch)

• Length: 455mm (18 inch)

• Flying Weight: 330g (Battery included)

• Driven system: Skyartec 4500KV brushless motor

• Gyro: Skyartec Head Lock

• Servo: 2X Skyartec 9g,1X skyartec 5g

• ESC: Skyartec 18A

• Battery: Skyartec 11.1V 900mAh Lithium Li-Po

• Control system: SKY703 2.4GHz 7CH Transmitter and Receiver

• Radio Control Range: 2500 feet (762m)