Fiber optic adapters are used to link fiber patch cables or fiber optic connectors. We supply various kinds of fiber optic adapters; types including single mode and multimode, LC, SC, ST, MU, FC, MTRJ, E2000, SMA, etc. these fiber optic adapters are relia

Fiber optic adapters are used to link fiber patch cables or fiber optic connectors. We supply various kinds of fiber optic adapters; types including single mode and multimode, LC, SC, ST, MU, FC, MTRJ, E2000, SMA, etc. these fiber optic adapters are relia

Fiber optic adapters are used to link fiber patch cables or fiber optic connectors. We supply various kinds of fiber optic adapters; types including single mode and multimode, LC, SC, ST, MU, FC, MTRJ, E2000, SMA, etc. these fiber optic adapters are relia

Fiber optic adapters are used to link fiber patch cables or fiber optic connectors. We supply various kinds of fiber optic adapters; types including single mode and multimode, LC, SC, ST, MU, FC, MTRJ, E2000, SMA, etc. these fiber optic adapters are relia

Comark fiber-optic video transceivers can simultaneously transmit 1-64 channels of 8-bit digitally encoded video / return or bidirectional data / unidirectional or bidirectional audio / Ethernet / Telephone / Dry contact over one multimode or single-mode

Comark fiber-optic video transceivers can simultaneously transmit 1-64 channels of 8-bit digitally encoded video / return or bidirectional data / unidirectional or bidirectional audio / Ethernet / Telephone / Dry contact over one multimode or single-mode

Cj-df series products are a type of multi-channel analog signal, the digital signal, and serial ports RS232/485/422 fiber conversion multiplexing equipment. It adopts the latest ARM chip, which is quite stable, reliable and low power, supports 1 ~ 4 chann

Performance index: Contact closure signal/TTL digital signal interface: Independent 1 ~ 4 channel input, 1~4 channel output Input mode can be elected by TTL input or dry contacts input TTL input level: input level + (0 ~ 1) V/logic "0", input level + (5 ~

Optical interface Wave lenghth： 850nm、1310 nm、1550nm。 Fiber type： multi mode 50/125 um、62.5/125 um、100/140um;single mode 8.3/125 um、9/125um、10/125um 。 Transmission distance：MM 2K

Electrical interface Optical A-B DH&DH+& Remote I/O bus networks SER1, SER2 industrial Pluggable Screw Terminal Data Rate: 57.6K, 115.2K, 230.4K Isolation voltage: isolation instantaneous voltage 5000V, Continued isolation voltage 1000V Wire End Terminati