Oriental Closed Loop Stepper Motors - Oriental Closed Loop Stepper Motor and Driver Pack

Quick Details:
Brand Name:OrientalOriental
Place of Origin:Japan
Series:AC Input Stepper Motor & Driver Systems
Specifications:
The AR series with built-in controller substantially reduces heat
generation from the motor through the use of high-efficiency
technology. In addition to implementing the closed loop control
based on Oriental Motor's original AlphaStep technology, the AR
Series also achieves up to 40% less power consumption, low
vibration, improved angle accuracy and is capable of driving
large inertia loads. Because it is a stepper motor, there is no hunting or gain tuning.
FLEX is the generic name for products that are used for Factory
Automation (FA) network control via I/O control, Modbus (RTU)
control, or a network converter. FLEX products enable easy
connection, easy control and reduce the complexity of system configuration.
The AR Series features frame sizes from 1.65 in. (42mm) up to 3.54 in.
(90mm) available with a wide range of gear options and
electromagnetic brake. Available in Single-Phase
100-120 VAC or Single-Phase 200-240 VAC power input.
All packages include a 9.8 ft. (3 m) motor cable.

Quick Details:
Brand Name:Oriental
Place of Origin:Japan
Series:AC Input Stepper Motor & Driver Systems
Specifications:
The AR series substantially reduces heat generation from
the motor through the use of high-efficiency technology.
In addition to implementing the closed loop control based on
Oriental Motor's original AlphaStep technology, the AR Series
also achieves up to 40% less power consumption, low vibration,
improved angle accuracy and is capable of driving large
inertia loads. Because it is a stepper motor, there is no hunting or gain tuning.
The AR Series features frame sizes from 1.65 in. (42mm) up to 3.54 in.
(90mm) available with a wide range of gear options and electromagnetic
brake. The driver for the AR Series is available in three power supply
voltages; Single-Phase 100-115 VAC, Single-Phase 200-230 VAC and
Three-Phase 200-230 VAC. All packages include a 9.8 ft. (3 m) motor cable.

Quick Details:
Brand Name:Oriental
Place of Origin:Japan
Series:AC Input Stepper Motor & Driver Systems
Specifications:
The AlphaStep with Built-in Controller offers the simplicity of a stepper
motor with closed loop control and the added simplicity of a built-in
controller. Using Oriental Motor's closed loop control, the AlphaStep
with Built-in Controller uses a built-in feedback device that constantly
monitors the motor shaft position to detect and correct for loss of
synchronism even during abrupt load fluctuations and accelerations.
The built-in controller driver has an integrated controller which ensures a
simple, efficient solution and is computer-programmable via an RS-232C connection.
The AlphaStep with Built-in Controller features frame sizes from 1.65 in.
(42mm) up to 3.54 in. (90mm) available with a wide range of gear
options and electromagnetic brake. The driver is available in
three power supply voltages; Single-Phase 100-115 VAC,
Single-Phase 200-230 VAC and Three-Phase 200-230 VAC.

Quick Details:
Brand Name:Oriental
Place of Origin:Japan
Series:AC Input Stepper Motor & Driver Systems
Specifications:
The RK Series incorporates a 0.72° high resolution stepper motor
with an AC input, microstepping driver to achieve guaranteed low
vibration and low noise while offering exceptional value and
performance. The RK Series offers Smooth Drive, a function that
ensures low vibration and low noise independently of the
input pulse frequency along with improved current control
for improved step angle accuracy.
The RK Series offers a standard motor type, IP65 rated motor type,
Harmonic, Planetary and Taper Hobbed geared stepper motors as
well as three frame sizes of 1.65 in. (42 mm), 2.36 in. (60 mm)
and 3.35 in. (85 mm) [3.54 in. (90 mm)]. Encoder options are also available.

Quick Details:
Brand Name:Oriental
Place of Origin:Japan
Series:AC Input Stepper Motor & Driver Systems
Specifications:
The SCX11 is a highly-functional and sophisticated controller equipped
with program editing and execution functions. Use the SCX11 as a
stored program controller to connect to any of Oriental Motor's
standard pulse input drivers. The SCX11 is also able to
control the motor via serial communications such as USB, RS-232C and CANopen.
The SCX11 replaces the SCX10 while retaining the same functions, software and
communications interface.

Quick Details:
Brand Name:Oriental
Place of Origin:Japan
Series:he AR series with built-in controller
Specifications:
The AR series with built-in controller substantially reduces heat generation
from the motor through the use of high-efficiency technology. In addition
to implementing the closed loop control based on Oriental Motor's original
AlphaStep technology, the AR Series also achieves up to 40% less
power consumption, low vibration, improved angle accuracy and
is capable of driving large inertia loads. Because it is a stepper motor,
there is no hunting or gain tuning.
FLEX is the generic name for products that are used for Factory Automation
(FA) network control via I/O control, Modbus (RTU) control, or a
network converter. FLEX products enable easy connection, easy
control and reduce the complexity of system configuration.
The AR Series features frame sizes from 1.10 in. (28 mm) up to 3.54 in.
(90 mm) available with a wide range of gear options and electromagnetic
brake. The driver uses either 24 or 48 VDC. [Only 24 VDC is available
for 1.10 in. (28 mm) motors.] All packages include a 3 m (9.8 ft.) motor cable.

Quick Details:
Brand Name:Oriental
Place of Origin:Japan
Series:The AR series
Specifications:
The AR series substantially reduces heat generation from the
motor through the use of high-efficiency technology. In addition
to implementing the closed loop control based on Oriental Motor's
original AlphaStep technology, the AR Series also achieves up
to 40% less power consumption, low vibration and is capable
of driving large inertia loads. Because it is a stepper motor,
there is no hunting or gain tuning.
The AR Series features frame sizes from 1.10 in. (28mm) up
to 3.54 in. (90mm) available with a wide range of gear options
and electromagnetic brake. The driver uses either 24 or 48 VDC.
[Only 24 VDC is available for 1.10 in. (28 mm) motors.]
All packages include a 3 m (9.8 ft.) motor cable.

Quick Details:
Brand Name:Oriental
Place of Origin:Japan
Series:The CRK Series
Specifications:
The CRK Series with a built-in controller and self correction
function is a motor, driver and built-in controller package that
features a 0.36° or 0.72° High Torque or Standard
type stepper motor with a compact, microstepping driver
with a powerful feature rich controller built in. The CRK
Series provides the lowest vibration and the highest positional
accuracy. The driver with built-in controller supports stand
alone or RS-485 communications with multi-drop
capability for network operation and I/O control.
The CRK Series is available with 5 frame sizes of 0.79 in.
(20 mm), 1.10 in. (28mm), 1.18 in. (30mm), 1.65 in.
(42 mm) and 2.36 in. (60 mm), 4 geared types and a
3-channel differential (line driver type) encoder options.

Quick Details:
Brand Name:Oriental
Place of Origin:Japan
Series:The CRK Series
Specifications:
The CRK Series is a motor and driver package that combines a
0.36° or 0.72° High Torque or Standard type stepper motor
with a compact, microstepping driver, providing the lowest
vibration and highest positional accuracy. The CRK Series
adopts a compact, lightweight driver with our Smooth Drive
technology, allowing your system to utilize the performance
of the 0.36° or 0.72° motor without changing your controller output pulses.
The CRK Series is available with 5 frame sizes of 0.79 in.
(20 mm), 1.10 in. (28mm), 1.18 in. (30mm), 1.65 in.
(42 mm) and 2.36 in. (60 mm), 4 geared types and encoder options.

Quick Details:
Brand Name:Oriental
Place of Origin:Japan
Series:The RBK Series
Specifications:
The RBK Series is a stepper motor and driver package consisting
of a 1.8° step angle stepper motor and DC input microstepping
driver. The RBK Series offers a High-Torque or Standard
stepper motor, a terminal box type stepper motor which is IP65
rated or a Planetary geared stepper motor. The RBK Series
offers the highest torque for the entire speed range and adopts
our Smooth Drive technology, allowing for maximum
performance without changing your controller output pulses.
The RBK Series is available with 5 frame sizes of 1.10 in. (28mm),
1.38 in. (35mm), 1.65 in. (42 mm), 2.22 in. (56.4mm) [2.36 in.
(60 mm) Geared] and 3.35 in. (85mm), geared types and encoder options.

Quick Details:
Brand Name:Oriental
Place of Origin:Japan
Series:The ASX Series
Specifications:
The ASX Series is an all-in-one closed loop stepping motor,
driver and controller with the feedback built in. The
ASX Series utilizes our Alpha Step technology which prevents
the motor from losing synchronism even when subjected
to abrupt load fluctuation or accelerations. The built-in rotor
position detection sensor constantly monitors the motor movement.
If synchronism is about to be lost, closed loop control is used,
eliminating concern over loss of steps.
The ASX Series offers three control methods, Pulse Input Mode,
RS-232C and I/O Control Mode (Sequence Operation Mode)
to meet a wide variety of applications. Available in a 2.36 in.
(60mm) frame size, with two packages, the Basic package or
the Developers package (everything included).

Quick Details:
Brand Name:Oriental
Place of Origin:Japan
Series:The CMK Series
Specifications:
The CMK Series is a motor and driver package that combines
a 0.9° or 1.8° High-Torque or Standard type stepper motor
or geared 1.8° stepper motor with one of the smallest,
lightest 24 VDC input microstepping drivers in the industry.
This system can divide the basic step angle by a maximum
of 16 resolutions without the use of a reduction
mechanism or other mechanical elements, allowing for a
reduction in size and lower vibration in your equipment.
Five frame sizes are available; 1.10 in. (28 mm), 1.38 in.
(35 mm), 1.65 in. (42 mm), 1.97 in. (50 mm) and 2.22 in.
(56.4 mm) [2.36 in. (60 mm)]. Models equipped with an encoder are also available.

Quick Details:
Brand Name:Oriental
Place of Origin:Japan
Series:The EMP400 Series
Specifications:
The EMP400 Series controllers allow for easy programming
using simple commands. The dual axis model provides coordinated
moves via linear interpolation. Using RS232C with or without
optional operator interface unit OP300, various motion profiles
can be achieved by using up to 32 sequence programs.
One program can be dedicated as a STARTUP program.
The EMP400 Series is designed for optimal performance
with any of Oriental Motor's standard pulse input drivers.

Quick Details:
Brand Name:Oriental
Place of Origin:Japan
Series:the SG8030 Series
Specifications:
With the SG8030 Series, all operations including data setting can
easily be performed using the four touch-screen buttons on the
top panel. In addition, the number of signal lines is reduced to
a minimum for easy connection.

Quick Details:
Brand Name:Oriental
Place of Origin:Japan
Series:The 0.36° Stepper Motors, High-Torque
Specifications:
The 0.36° Stepper Motors, High-Torque type provides 1,000 steps
per revolution by having 100 teeth on the rotor and contributes to the
highest resolution and lowest vibration. This motor also achieves
improved stopped positional accuracy of 2 arc minutes.
These motors are available in frame sizes from 1.10 in. (28 mm) up
to 2.36 in. (60 mm). Encoder options are available as a standard offering.

Quick Details:
Brand Name:Oriental
Place of Origin:Japan
Series:The 0.72° Stepper Motors
Specifications:
The 0.72° Stepper Motors are available in High-Torque, Standard
or Terminal Box (IP65) type. The 0.72° Stepper Motors offers
improved performance and reduced vibration.
These motors are available in frame sizes from 0.79 in. (20 mm)
to 3.35 in. (85 mm). Encoder option is available on High-Torque and Standard types.

Quick Details:
Brand Name:Oriental
Place of Origin:Japan
Series:The 0.9° Stepper Motors
Specifications:
The 0.9° Stepper Motors offers improved performance and reduced vibration.
These motors are available in 1.65 in. (42 mm) and 2.22 in. (56.4 mm)
frame sizes. Encoder options are available.

Quick Details:
Brand Name:Oriental
Place of Origin:Japan
Series: PKP Series
Specifications:
In addition to offering high torque, the PKP Series stepper motors
offer more variety of electrical specifications, more frame sizes,
encoder models and geared type motors, for the optimum stepper motor solutions.
The PKP Series is available in 0.79 in. (20 mm), 1.10 in. (28 mm), 1.38 in.
(35 mm), 1.65 in. (42 mm) and 2.22 in. (56.4 mm) frame sizes.
Also available in a 1.8° stepper motor is our High Torque-High Efficient
type or Terminal Box type or our High Inertia type stepper motors.

Quick Details:
Brand Name:Oriental
Place of Origin:Japan
Series:Step Angle 0.72° or 1.8°
Specifications:
Basic Step Angle 0.72° or 1.8°
Non-backlash types (Harmonic and Plantary gears)
Low Backlash types (Planetary and Taper Hobbed gears)
New! Spur gears
Encoder models available
Available frame sizes:
0.79 in. (20 mm)
1.10 in. (28 mm)
1.65 in. (42 mm)
2.36 in. (60 mm)
3.54 in. (90 mm)