Manual Reset Thermostat For Hair Dryer or Heater - AMT-P1 Specificaton & Trade Terms
Model | AMT-P1 |
---|
Place Of Origin | China |
---|
Price Term | EX-Work |
---|
Payment Term | T/T |
---|
PTC component and contact circuit form a parallel circuit. With the heading up of temperature, contact circuit is off and current flows through PTC component to form a loop. The temperature of PTC component increases rapidly, being higher than rated reset temperature and keeping the circuit in the off state. When the general power is off and temperature decreases to the reset temperature of bimetallic strip, the strip recovers rapidly and contact closes, providing a safer and more reliable protection on circuits.Technical Parameters
Switch Type : normally closed
Operating Voltage/Current: AC250V/10A AC125V/16A
Operating Temperature: 50-150C (one step for every 5C)
Standard Tolerance: +/-5C
Reset Temperature: operating temperature decrease by 15-45C
Contact Closure Resistance: not more than 50 milliohm
Insulation Resistance: not less than 100 Milliohm
Service Life: 10000 times