High Speed Air Jet Loom - SXD-528

1. SXD-528 High Speed Air Jet Loom adopts two strong sides- box- type loom frame to increase the support strength of spacer, which guarantees for weaving high density, wide width fabric in high speed with low vibration and low noise.
2. The rockshaft use solid spindle to raise mid-support and upgrade the beating-up's exactitude and strength in high speed.
3. SXD-528 High Speed Air Jet Loom uses super start motor to get high quality in the 1st weft, which can avoid stop.
4. SXD-528 High Speed Air Jet Loom uses big torque electromagnetic brake to enhance braking force.
5. The start model can choose as follow: Empty Beating-up Starting. Single Weft Insert Starting, Fast Weft Insert Starting.
6. SXD-528 High Speed Air Jet Loom adopts Servo electronic let off and Servo electronic take up. Positive pacing warp device can keep warp tension constant.
7. SXD-528 High Speed Air Jet Loom can be configured negative cam, positive cam, and electronic dobby shedding mechanism for weaving light and heavy muslin, twilled, satins, and jacquard fabric to meet all kinds of requirements.
8. SXD-528 High Speed Air Jet Loom combines main nozzle and sub nozzle, which can get high yarn speed even in low air pressure and better for high speed weft insertion. Users can individually set the jet time of main nozzle, the sub nozzle and drag nozzle, which can improve the accuracy of weft insertion and expanding the weaving scope and reduce the air consumption.
9. The ultra short air line and the support control design of sub nozzle reduce about 10% air consumption.
10. SXD-528 High Speed Air Jet Loom adopts double probes, besides detect short filling picks or curved, it also can detect blown-off-weft or Long weft.
11. Using digitally-controlled potentiometer to adjust the weft test sensitivity and improve the reliability of weft detector.
12. Loom lubrication: Centralized Oil Supply System controlled by the microprocessor
13. Textile Adaptability: short yarn:Ne 100-Ne 2.5; Filament50 dtex-900 dtex

Technical Specifications:
1. Weft insertion: main nozzle + assistant main nozzle+ accessorial nozzle, Main nozzle and accessorial nozzle are controlled by electromagnetic valve, loom above 280cm adopts bilateral 6 link rod beating up structure. Loom below 280cm adopts bilateral 4-linkrod beating up structure.
2. Nominal width: 190cm, 210 cm, 230 cm, 280cm, 340cm, 360cm.
3. Width: 190cm Speed: 900rpm
Width: 210cm Speed: 900rpm
Width: 230cm Speed: 900rpm
Width: 280cm Speed: 800rpm
Width: 340cm Speed: 750rpm
Width: 360cm Speed: 700rpm
4. Power: Main motor power 3.7KW (above 280), Main motor power 3.0KW (below 280) Electromagnetic braking
5. Weft density range: 50-1400 pick/10cm.
6. Take up: Electronic Take up, servo motor750W, big take-up rollor dia600mm (on machine).
7. Let off: Servo let off, servo motor750W, Warp beam dia. 800mm, with positive warp loosen device.
8. Shedding: Dobby (Electric, positive, lower) with 16 sheets heald frame at most.
9. Selvedge: by planet gear, you can choose tuck in device as well.
10. Weft selecting: one, double, four colors.