Fire-fighting

Technical parameterFlow type Straight stream or fog patternRated flow rate 2400L/minWorking pressure 0.8MPaMax pressure 1.6MPaThrow distance ≥65mFoam lancing distance 50mRemote control distance 300mFog angle ≥100°Horizonal travel -44°～

Technical parameters:Device dimension:750*700*340mmFlow pattern:jet&fogWorking pressure：0.8MPa(8 Bar)Working pressure range:0.5-0.8MPa(5-8Bar)Rated flow rate：2100Litre/min(567GPM)Water throw distance≥60mMax fog angle≥120°Vertical

Flow pattern Jet&Fog Nominal pressure 10Bar Nominal flow 1800l/mim 2400l/min 3000l/min Max pressure 12Bar Thrwo distance ≥55m ≥60m ≥65m Vertical travel +30°~90° Weight 23kg Horizonal traval ±90° Dimension 720×430×685mm Couplin

Pressure range: 4-20 bar Working pressure: 5kg/m at 10 bar Shooting distance:16m Material: The head is made of anodized alluminum alloy pipe. Nozzle body and grip is made of aluminium which is anodized for anticor

Pressure range: 4-20 bar Max flow rate: 480l/m at 7 bar Shooting distance:33m Material: The head is made of fine alluminum alloy. Nozzle body and grip is made of aluminium which is anodized for anticorrosion.

Pressure range: 3.5-16 bar Max flow rate: 600l/m at 8 bar Material: The head is made of rubber. Nozzle body and grip is made of aluminium which is anodized for anticorrosion. Spinning teeth will makes the fog more sufficien

Pressure range: 3-16 bar Max flow rate: 550l/m at 6 bar Two water curtains.Spray&jet,spray&spray. Material: The head is made of rubber. Nozzle body and grip is made of aluminium which is anodized for anticorrosion. Spinning teet

Pressure range: 3.5-16 bar Max flow rate: 300l/m at 7 bar Flow rate setting:130-250-280-300 l/min Material: The head is made of rubber. Nozzle body and grip is made of aluminium which is anodized for anticorrosion. Spinning teeth will m

Pressure range: 3.5-16 bar Max flow rate: 680l/m at 12 bar Flow rate setting:150-350-450-550L/min Material: The head is made of rubber. Nozzle body and grip is made of aluminium which is anodized for anticorrosion. Spinning teet

Pressure range: 3.5-16 bar Max flow rate: 950l/m at 7 bar Flow rate setting:380-480-650-780-950 l/min Material: The head is made of rubber. Nozzle body and grip is made of aluminium which is anodized for anticorrosion. Spinning