Chemical Additives, Auxiliary

CAS NO.: 3194-55-6MF: C12H18Br6MW: 641.6953Appearance: White powder/particleHBCD Content: >99%Bromo Content: >73.5Melting Point: 175--190℃Volatility (105℃,2h): ≤0.5%Fe-/Cl-/Zn-: Fe-10.0(ppmMAX)

Character: It can dissolve into alcohol, carbon disulfide, slightly dissolve into water. It can evaporate with water vapor.Application: Used as a photographic materials, spices, synthetic organic intermediates, also used as reagents of agricultural plants

Application: Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good heat aging and compression set re

Application: Provides fast cure rate and high modulus development in NR, SBR, BR and blends. Normally used alone or with small quantities of ultra accelerators in tire compounds or industrial rubber products low poison and high efficiency. It is good back

Application:An excellent delayed accelerator. The performance is similar as CZ with better scorch safety. Widely used in NR, IR, SBR, NBR and EPDM. Can be used alone or with those vulcanization Accelerators such as thiurams, guanidines and dithiocarbamate

Application:A medium fast primary accelerator suitable for NR, IR, SBR, NBR, HR and EPDM. An outstanding delayed action accelerator. Be top effective and safe when used at ordinary processing temperatures, causing no scorches. Vulcanized show excellen

Application:Rubber Accelerator MBTS gives flat, moderately fast cures in NR, IR, SBR, NBR, EPDM, IIR. Also used in a wide range of general  purpose rubber.Also Can be used alone as delayed action accelerator, normally with accelerators of guanidines & thi

Application: Used for NR, IR, SBR, NBR, HR and EPDM.One of the mainly used acidic accelerators currontly and a medium fast primary accelerator. Imparts excellent aging properties, when used both alone and in combination with DM, TMTD and many others, ma

Rubber chemical : MTT-80 (3-methylthiazolidine-2-thione) CAS# 1908-87-8Product Name : 3-methylthiazolidine-2-thioneSynonyms : 3-methylthiazolidine-2-thione;2-Thiazolidinethione, 3-methyl-;3-methyl-2-thiazolidinethion;3-methyl-1,3-thiaz

Cationic Rosin Sizing AgentI. Introduction    Cationic rosin Sizing, due to its own positive charge, can combine with negative charge of pulp fibers to achieve self-retention, also promote the retention of fillers and fine fibers, and can achieve acidic a