CO2 Fractional laser - JZ

Basic specification

Normal mode:
Wavelength far-infrared laser
Pulsed radiofrequency 0.5-30 W

Super-pulse
1.Max power: 120W
2.Pulse width:200 to 500us is optional
Pulse 1.Average power: 0.5-20W
2.Pulse frequency:33.3 Hz
Matrix mode:
Scan Graphics Square, rectangle, round or customized graphics
Dot quantity 400 dots at most
Working state Super-pulsed mode
Scan mode Ordinal scan
Pulse energy 10mj to 100mj is optional for each dot.
Matrix mode:
Scan Graphics Square, rectangle, round or customized graphics
Dot quantity 400 dots at most

Technical specification

Laser apparatus Sealed-off laser device stimulated by direct current
Condenser focus f=100mm
Spot mode Lower mode
Beam divergence angle 0.3 mrad
Spot size Min 0.2mm at the focus
Max power intensity 75,000 W / cm²
Radiation time 0.01-1 sec
Interval time 0.01-1 sec
Aiming indicative beam Less than 2mW,635nm red semiconductor laser
Beam transport device Arm with six segments and balance weight
Power supply 230V, 20A
Appearance specification
Volume 380mm×260mm×1050mm
Net Weight 40 Kg

Functions and Advantages

Predominant as compared with regular surgical devices, CO2 Laser Scan System can bring about such effect to the skin tissue as solidification, boil off and carbonization by laser-cut, burning and radiation with its 10.6um invisible light. This treatment features itself as short time, less bleeding, fast recovery and strong anti-infected.
In Matrix mode, CO2 Laser Scan System applies CO2 laser deeply into skin to exert new collagen generation with its innovative CO2 laser partial treatment method. In this mode, thermal damage is comparted so that the healthy tissue can be served as thermal diffusion area to avoid the side effect caused by thermal damage. Meanwhile, skin recovery is accelerated as well. Patients can return their normal routine sooner than expectation.

Dir Line: 0086-23-67720051
***2
Email: vip6_guoguang@
***