A515 Gr65 and SA515 Gr 65 steel plate - GANGSTEEL

A515 Gr65 and SA515 Gr 65 pressure vessel steel plate

Related Grade: A515 Grade 70 | A515 Grade 65 | A515 Grade 60|SA515 Gr70|SA515 Gr65|SA515 Gr60

Application: SA/A515Gr65 steel is a carbon pressure vessel steel grade for moderate and lower temperature service for a variety of applications in the Petrochemical, Chemical, Oil & Gas Industries.

SA/A 515Gr65 usual request normalized if thickness above 40mm, if not , Gangsteel usual delivery in hot rolled or control rolled station. SA/A 516 Gr.65+N or A516gr65N mean that steel grade must be normalized in any thickness.

Supplementary Technology: HIC Test | NACE MR0175 | Z15 | Z25 | Z35 | S1 | S2 | S3 | S4| S5 | S6 | S7 | S8 | S9| S11 | S12 | S14 | S17

Dimension we could supply:
Thickness 6mm-300mm, Width: 1500-4020mm, Length: 3000-15000mm

Delivery Condition: Hot rolled, CR, Normalized, Quenched, Tempering, Q+T, N+T, TMCP, Z15, Z25, Z35, HIC

Chemical Composition(max %):
C % Si % Mn % P % S %
0.33 0.13-0.45 0.98 0.035 0.035

Mechanical Properties:
Thickness(mm) Min Yield (Mpa) Tensile(MPa)
6mm-40mm 240Mpa 450-585Mpa
40mm-100mm 240Mpa 450-585Mpa

Henan Gang Iron and Steel Co. Ltd( Gangsteel) is specialized in low alloy high strength structural steel, mainly dealing with specification standard plates in ASTM A285, ASTM A537, ASTM A516, ASTM A515, ASTM A514, ASTM A662, ASTM A387, ASTM A517, ASTM A203, ASTM A202, ASTM A203, SA302, JIS G3115, JIS G3103, EN 10028-2, EN 10028-3, EN 10028-5, EN 10028-6, and so on, the thickness up to 300mm.

To find out more about SA/A515 Gr65 or other low alloy high strength steel, and to receive a competitive quotation for supply of this material, please feel free to contact us.

Yours sincerely,
Ms. Olina

Henan Gang Iron and Steel Co., Ltd