Dear Sir,
ARS is an independant slitting service center located in France. We buy brass and copper in coil/strip (around 100MT/month) and we are looking for establishing a long term relationship with a copper alloy manufacturer. So, could you, please, give me prices based on the cash settlement LME -premium including- for full 20MT dry 20' container CIF Antwerpen (Belgium) about the following grades:
1) Brass in coil- CuZn33/37 - EN 1652
Condition: CuZn33 soft annealed (HV 55-80-grain size OS25/35)
CuZn37 half hard temper rolled (HV 95-120)
Thickness:0.30- 0.40- 0.50- 0.60- 0.80- 1.00- 1.50- 2.00- 3.00 mm
0.30 mm +/- 0.015
0.40 mm +/- 0.015
0.50 mm +/- 0.020
0.60 mm +/- 0.020
0.80 mm +/- 0.025
1.00 mm +/- 0.030
2.00 mm +/- 0.040
Width: 400 to 620 mm maximun
Quantity per size:3-6MT
ID: 400 or 508 mm Coil weight: 3.0 Kg/mm minimum - 3.0T maximum per coil.
2) Copper in coil- Cu-ETP - EN 1652
Condition: Cu-ETP soft annealed (HV 40-60)
Cu-ETP half hard temper rolled (HV 90-110)
Thickness: 0.30- 0.40- 0.50- 0.60- 0.80- 1.00- 1.50- 2.00- 3.00 mm
0.30 mm +/- 0.015
0.40 mm +/- 0.015
0.50 mm +/- 0.020
0.60 mm +/- 0.020
0.80 mm +/- 0.025
1.00 mm +/- 0.030
2.00 mm +/- 0.040
Width: 400 to 620 mm maximum
Quantity per size:3-6MT
ID: 400 or 508 mm Coil weight: 3.0 Kg/mm minimum - 3.0T maximum per coil.
Awaiting your best proposal,
Best Regards
Patrick Tillet
Tel 33 3 44 61 21 62
Fax 33 3 44 25 03 08
Website:***